filter,air filter,water filter
进入中文版  中文版 进入英文版  ENGLISH
Contact Us

Name: Aimee
Tel: 020-36674043
Fax: 020-36674043
Mobile: 13178816620
E-mail: 1325306980@qq.com
QQ: 1325306980
QQ: 1325306980

Product name : Yellow insulation glass wool board
 Enlarge Image                   Back
←[Previous Product]              [Next Product]→


Details:
Yellow insulation glass wool board 
Fibrosis is carried out after melting the glass, by adding the processing of the adhesive curing. Glass wool felt, and wool fiber diameter depends centrifugation extrusion technology. Glass wool glass wool board is deep-processed products, which meet all of the raw wool board semi-polished by, glue, stickers, processing and other processes made. 
 
Regular size: 1.2mX0.6mX50mm 
 
Features: 
Acoustic noise, can effectively prevent sound transmission 
Construction is simple, free cutting. 
Antibacterial mildew, aging resistance, corrosion resistance, ensuring a healthy environment. 
A1 class fire, a permanent non-combustible. 
Low moisture, high durability. 
 
Uses: 
1, roof insulation, cold, sound-absorbing material 
2, building insulation, cold 
3, entertainment theaters, television stations, radio stations, laboratories, acoustic treatment 
4, air conditioning, refrigeration and cold storage pipeline insulation 
 
Installation of glass wool board 
1, glass wool board row board requirements: the standard whole format (Size: 1200X600) bottom-up male half horizontally laterally staggered board long paving. Vertical wall around the corner from the start cross connection pasted plates, to ensure straight and perpendicular to the corner. Yin, Yang corner glass wool board should be staggered interlock. Door and window openings shall be spliced ​​at the four corners of glass wool, glass wool board should be cut to shape using the entire board should be cut with a vertical wall corners application not less than 300mm of insulation board pasted. 
2, the front glass wool board uses to design a good way of laying. Calculate the size of cut cutting, trimming the edges straight error should be less than 5mm. 
3, glass wool board laying coupled to each other from top to bottom, glass wool board shall order the laying, when faced with door and window openings, shall comply with the relevant requirements of Atlas. 
Board anchoring and surface treatment 
4, anchor: insulation board is installed into the wall anchor installation depth of not less than 30mm. Selection Φ8X120mm, Φ8X100mm anchored anchoring screw, using hammer drilling in facades, aperture is 10mm; hole deep 120-140mm (including insulation thickness), the plastic expansion bolts installed and sturdy, making glass wool board and exterior face closely. After tightening the anchor point should be below the surface of glass wool board 1 ~ 2mm. Arrangement of anchor points: glass wool board in the middle of the corners and horizontal joints are set anchor points. 
5, the installation Anchors longitudinal spacing of 600mm, the lateral spacing 600mm, plum-shaped layout, encryption primary wall around the corner to the spacing of 300mm, and meet the design and related standards. 
Special parts of the processing system 
6, in the face of the window of the door opening, according to the length of wall parts may be.
 

Related Products :
Fire sound-absorbing sponge
Fire sound-absorbing sponge
Pyramid sound-absorbing cotton
Pyramid sound-absorbing cotton
Cooling tower silencer pad
Cooling tower silencer pad
Cooling tower silencer blanket
Cooling tower silencer blanket
Pre-filter roll
Pre-filter roll
Damping soundproofing blanket
Damping soundproofing blanket
Wave-absorbing cotton
Wave-absorbing cotton